How to paint a car?

In this article we are going to offer you the enough information you need in order to start painting your car in a professional way

1. Find a nicely lit, spacious and aerated place to paint your car. Such a place should contain minimal air particles including pollen, pollutants and dust.

2. Materials Needed

-Wax Grease Remover-

-Sand Paper-

(*180-220 Grit Sand Paper to Remove Scratches*320 to Sand all Surfaces Evenly *400 Grit Sand Paper to Remove Primer Spots)

-Body Putty-

-Primer-

-Urethane Based Paint for Color - Spray Gun-

3. Wash, rinse and polish your car, making sure dust and dirt particles come off. Damage can be seen if specks and stained bumps are not cleaned and painted over.

4. For dirt and mold that won't peal off with water, use the wax/grease remover. You may also substitute spirit and charoal cleaner based solutions for this process.

5. The bumpy and rough areas of the surface should be sanded off into a more even tone.

6. Cover all the car areas that don't need to be painted with tape. (Masking tape)

7. Ensure all surfaces are dry and apply body putty to even and straighten out the surface. Add the primer making sure that your care surface will maintain an even surface.

8. Your first paint coat - Apply the urethane based color paint evenly across the wanted surfaces. (The entire surface should be even in texture)

9. Wait 15 minutes for paint to dry and repeat the last process. (Apply the urethane based color paint over the previous coat)

10. This time, let the paint dry for 30 minutes and repeat the process again. (Apply the urethane based color paint over the previous coat)

A new paint job is the result of several equally important steps. Plan ahead and make each step flawless and the end result will also be flawless.

More articles about car ,please pay attention to tatamall’s blog.